1-300ton Anti-high Temperature Factory Transfer Molten Hot Ladle Transport Vehicle
Description --- hot ladle transport vehicle
The hot ladle transport vehicle also known as ladle car, ladle transfer trolley, molten steel ladle car, ladle transfer car, etc. It use heat insulating material, and can resist the high -temperature. In order to ensure safety and working frequency, the ladle transfer bogie usually prepared two motors, When one is damaged, the other one can be used to continue the work.
This kind of ladle transfer car can solve problems with high temperature steel ladle, liquid iron ladle transferring in metallurgy industry.
Ladle transfer car is specially designed to transfer the high-temperature ladle. This kind of transfer car has strict requirements on safety and anti-high temperature, so the material, driving system and electrical parts of the bogie should be specially designed.
Working Principle --- Molten
KPX Series hot ladle transport vehicle are battery powered. The batteries are installed in the carts. The batteries supply electricity to the DC motor through the electrical control system. We use this principle to operate the carts, for example, start, stop, go forward and backward, adjust the speed and so on.. The batteries need maintenance once a regular time. The lifetime of the batteries is about 3 - 5 years. The using time after once charge is limited.
hot ladle transport vehicle
This series hot ladle transport vehicle is powered by battery. The battery supply power to the DC motor, which is installed inside of transfer car body. Through the order of start, stop, forward, back, speed governing, etc, electrical control system command the order to DC motor to drive transfer car working.
The power supply also can be customized according as per demands, such as low voltage rail power, cable reel power, busbar power, etc.
Parts Details --- hot ladle transport vehicle
|
|
| Storage Battery |
Battery Charger |
|
|
| Electric Control Box |
Sound & Light Alarm |
Application --- hot ladle transport vehicle
The hot ladle transport vehicle is commonly applied in steel industry or metallurgy industry to transfer liquid steel, steel ladle, steel scraps, etc. It can be used within workshop handling or between workshops.
In order to ensure the platform and driving system damaged by high-temperature, there is firebrick laid on the platform of the ladle. Or the driving system is protected by special design.
Technical Parameters --- hot ladle transport vehicle
| Model |
KPX-2T |
KPX-10T |
KPX-20T |
KPX-30T |
KPX-50T |
KPX-63T |
KPX-150T |
| Rated load (T) |
2 |
10 |
20 |
30 |
50 |
63 |
150 |
| Table size |
length(L) |
2000 |
3600 |
4000 |
4500 |
5500 |
5600 |
10000 |
| Width(W) |
1500 |
2000 |
2200 |
2200 |
2500 |
2500 |
3000 |
| Height(H) |
450 |
500 |
550 |
600 |
650 |
700 |
1200 |
| Wheel Base (mm) |
1200 |
2600 |
2800 |
3200 |
4200 |
4300 |
7000 |
| Rail Inner Gauge (mm) |
1200 |
1435 |
1435 |
1435 |
1435 |
1435 |
2000 |
| Wheel Diameter(mm) |
Φ270 |
Φ300 |
Φ350 |
Φ400 |
Φ500 |
Φ600 |
Φ600 |
| Wheel Quantity |
4 |
4 |
4 |
4 |
4 |
4 |
8 |
| Ground Clearance (mm) |
50 |
50 |
50 |
50 |
50 |
75 |
75 |
| Running speed (min) |
0-25 |
0-25 |
0-20 |
0-20 |
0-20 |
0-20 |
0-18 |
| Motor Power (Kw) |
1 |
1.6 |
2.2 |
3.5 |
5 |
6.3 |
15 |
| Running Time When Full Load |
4.32 |
4.8 |
4 |
3.5 |
3.3 |
3 |
2.9 |
| Running Distance for one Charge(Km) |
6.5 |
7.2 |
4.8 |
4.2 |
4 |
3.6 |
3.2 |
| Max Wheel Load (KN) |
14.4 |
42.6 |
77.7 |
110.4 |
174 |
221.4 |
265.2 |
| Reference Weight (t) |
2.8 |
4.2 |
5.9 |
6.8 |
8 |
10.8 |
26.8 |
| Recommended Rail Model |
P15 |
P18 |
P24 |
P38 |
P43 |
P50 |
QU10 |
Delivery --- hot ladle transport vehicle
Rail Transfer Cart Applied At Site In Customers' Factory
After-Sale Service
-
Our commitment: The load bearing safety factor of the trolley is no less than 120%.
-
Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material.
-
16 hours engineering service and 24 hours internet service for our customers.
-
During the warranty period, if our products can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours.
-
Solving the quality problem within 24 hours, serious attitude from beginning to end. Value the reputation and Preserve the image of our company.
Contact info:
Lucy Ji
Xinxing New Leader Machinery Manufacturing Co., Ltd
T:86-373-5289556 F:86-373-7720077
E-mail: sale@newldmachinery.com
¡Su mensaje debe tener entre 20 y 3.000 caracteres!
